Mopar Intake

Mopar Intake Information

Mopar Performance P4452114 V6 3.9 4-bbl Single Plane Intake Manifold 4150 Dakota. Mopar Performance P4452114 V6 3.9 4-bbl Single Plane Intake Manifold 4150. New Old Stock With Mopar Box, What You See Is What You Get, Looks To Be In Good Condition, Check Photos. Sold As Is Condition, Make Sure It Fits Your Application Not Responsible For Not Fitting On Your End. Have The Right To Cancel A Sale If Less Than 10 Feed Back And Shipping In The Continental United States Only.

Mopar Intake Manifold Throttle Bracket, 360, 440, 383, Dodge Charger, Coronet. Your Buying 1 Of Your Choice. Oem Factory Part.

Mopar Edelbrock 383-400 Torker Intake,dart,duster,cuda

Mopar 340 Six Pack Setup,70 Aar Cuda,70 T/a Challenger

Chysler 1827899 361-400 Dual Quad Intake, Dual Plane, 4150 Flanges, Cast Iron. Carb Flange Dual 4150 Flanges. Application Sb Mopar 361, 383, 400. Style Dual Plane, Dual Quad. All Intakes Are Reconditioned By Our In-house Techs. Condition Excellent.

Mopar 426 Hemi Super Stock Aluminum Crossram Intake Manifold Cross Ram P4532267. Lightly Used Mopar Performance Aluminum 426 Hemi Crossram Intake Manifold With Holley Hp 750cfm Pc (performance Carb) Carbs. Unpaid Item Policy.

Mopar Performance Cast Alum. Air Cleaner,cuda,challenger,charger,dart. Mopar Performance Cast Alum.

Genuine Mopar Dodge Chrysler Intake Manifold 2.4l Stratus Sebring 2003-2006

This Is A N.o.s Oem Genuine Dodge 2.4l Intake Manifold For The Chrysler Sebring & Dodge Stratus. Stratus 03 Sdn, 2.4l. Stratus 04-05 Sdn, 2.4l, Wo Pzev. Mfg Mopar. Stratus 06 (sdn), 2.4l. Sebring 03 Conv, 2.4l.

Nos Edelbrock Dp6b 3x2 Tripower Intake 361 383 400 Mopar Challenger Charger Look. Nos Edelbrock Dp6b Tri Power Intake. Never Used. Needs A Little More Cleanup...but Its New. Shipping In The 48 Us States Is $45 (insured)

Grid Intake Heater Fuel Relay Kit Pair Set Of 2 For 03-05 Ram Pickup 5.9l Diesel. 2003-05 Dodge Ram 2500 Truck L6 5.9l Diesel Intake Heater Relay. 2003-05 Dodge Ram 3500 Truck L6 5.9l Diesel Intake Heater Relay. This Item Is Backed By A 1 Year Warranty. This Warranty Covers The Cost Of The Part Only.

Mopar 5.7 Hemi Intake Gaskets 53032382ab Set(8). Mopar 5.7 Hemi Intake Gaskets 53032382ab Set(8).

Rare Nicson Dodge Plymouth Cars Flathead 1x1 6 Cyl. 218 And 230 Intake Manifold

Rare Nicson Dodge Plymouth Cars Flathead 1x1 6 Cyl. 218 And 230 Intake Manifold.

Mopar Chrysler Dodge Sb 318 340 360 Midrise Air Intake Manifold Satin

The Speedmaster Midrise Air Design Features The Identical Plenum And Runner Design As The Normal Midrise. The Main Difference Is That There Is An Open Area Under The Plenum Chamber. Product Line Midrise Air.

1970 Oem Original Cast Iron Big Block Mopar Intake Manifold 2951736 Dodge 440. 1970 Oem Original Cast Iron Big Block Mopar Intake Manifold 2951736 Dodge. Dated 10-28-69chrysler Dodge Plymouthall Bolt Holes In Good Shapeneeds Cleanupcharger Rt Roadrunner Superbee Coronet Cuda Challangerb-bodye-bodyfits All Rb 413440 Engines

Engine Intake Manifold Mopar 04884495aj Intake Manifold Only No Rcv. Engine Intake Manifold Mopar 04884495aj Intake Manifold Only No Rcv. Taken Off A 2009 Dodge Avenger 2.4l At 67000 Miles. Works Well. No Runner Control Valve Included. Both Were Replaced On The Avenger But Only The Rcv Was Faulty The Manifold Is Fine. Ships To Lower 48 States Only.

Offenhauser Dodge 426 Hemi Tunnel Ram Intake Manifold 5944 Dual Quad 2x4 Mopar. This Is An Offy Tunnel Ram 2x4 Manifold For A 426 Hemi Mopar. It Needs A Slight Cleanup- Otherwise Looks Pretty Good - See Pics.

Mopar 413 426 Max Wedge Cross Ram Intake Manifold Plugs & Bolts. Here Are Three 413 426 Max Wedge Cross Ram Intake Manifold Plugs And Seven Cross Ram Intake Bolts.

64 65 Factory Mopar 426 Hemi Nascar Aluminum Intake Manifold 2468063 Petty 43

You Are Looking At A Rare 1964-65 Gen Ii 426 Hemi Nascar Aluminum Intake Manifold, Pt# 2468063 Revision K. Other Than One Hela-o-coil, I Found No Other Repairs, Stripped Threads Or Snapped Off Bolts.

Engine Intake Manifold Mopar 53034229aa. Engine Intake Manifold. To Confirm That This Part Fits Your Vehicle, Enter Your Vehicle's Year, Make, Model, Trim And Engine In Thecompatibility Table. The Engine Typ Es May Include 4.7l 287cu. V8 Flex Sohc Naturally Aspirated,4.7l 287cu.

330 341 Hemi Desoto Intake Manifold Mopar Oem. 1957 1958 Desoto. Oem Intake For The 330 341 Desoto Hemi Motors. Freshly Bead Blasted And All Mounting Surfaces In Good Condition. No Breaks Or Repairs.

1970 Mopar 440 6 Pack Intake Manifold Six Pk Cast Iron E & B Body Superbird Cuda

Hard To Find One Year Only Six Pack Cast Iron Intake Manifold. It Looks To Be Dated November 7th Of 1969 But Please Verify That For Yourself As Castings Can Be Difficult To Read. This Looks To Be A Very Clean Intake, Use As Is Or Restore For Show. See Pictures For Condition And Wear As We Rely Heavily On Photos. Applications Are Based Upon Various Sources, Although I Try To Make Sure Research Is Correct It Can Be Flawed So Please Verify Your Applications. Please Use A Pc To Take Advantage Of The Zoom Feature As It Will Provide Much Greater Detail Than A Portable Device. Free Shipping Is To The Lower 48 States Only.

Edelbrock 28155 Super Victor Efi Intake Manifold Small-block Mopar La Series. Edelbrock Part Number 28155. Edelbrock Part #29155 Victor 340 Efi Intake Manifold Is Designed For 340-360 C.i.d. Chryslers Using Standard Rectangular-port Heads. Can Be Used On 318 C.i.d. Engines With 340-360 Heads.

Intake Manifold Bolts Set 12point For Mopar Chrysler Dodge Big Block 383 400 440

We Are The Big Block Mopar Parts Experts. Our Performance 12 Point Bolt Kits Are A Nice Looking Option That Features Grade 8 Strength, Black Oxide Coating, And With A Price That Doesn't Break The Bank.

Dodge Mopar Plymouth 340 360 Magnum Air Gap Dual Plane Aluminum Intake Manifold. For Sale Is A New Aluminum Dual Plane Intake For Small Block 340360 Mopar Engines. Dual Bolt Pattern, Fits '67-'03 Including The Newer 3185.2l And 3605.9l Magnum Heads. Will Also Fit 273 And Earlier 318 Engines That Have 4 Barrel Heads (heads On Early 2 Barrels Have Smaller Port Size).

Dodge Chrysler Jeep "refurbished"air Intake Manifold 4.7l Ram Durango Grand Che

This Is A " Refurbished" Intake Manifold For 4.7l Engines Up To 2007. Number Will Be Located On Intake Manifold It Self Stamped To The Plastic And It Ends With 2 Letters. "fl Engines 4 Less".

Mopar 383 400 Edelbrock Performer 383 Aluminum Intake Manifold *very Nice!*

Mopar 383 400 Edelbrock Performer 383 Aluminum Intake Manifold *very Nice!*. You Are Looking At A Very Nice Mopar B Engine 383 400 Edelbrock Performer 383 Aluminum Intake Manifold. This Is A Hard Manifold To Find And Is In Very Nice Shape As Shown. All Threaded Holes Are Perfect. Just A Nice Problem Free High Performance Edelbrock Manifold. Please View The Pictures Provided As It Will Come Exactly As Shown. It Will Be Very Well Packaged Ensuring Safe Arrival At Your Door. Thanks For Looking!

Mopar Sb 340 Factory Cast Iron Intake Manifold 3614025 1971-72 Thermoquad J17555. Factory Intake Manifold For 1971-72 340 4 Bbl Thermoquad Carburetors Cuda Challenger Roadrunner Dart Duster J17555

Intake Manifold Gasket Mopar 04781034ab New Genuine Oem.

Sbm Intake Manifold Bolts Stainless Kit Small Block Mopar Dodge 273 318 340 360. Small Block Mopar Intake Manifold Bolt Kit (allen). Rusty, Rounded-off Bolts Is A Thing Of The Past! Rogue Stainless Steel Allen Socket Head Bolts Will Not Round Off Like Hex Head Bolts And Are The Clear Choice When Bolt Clearance And Accessibility Is At A Premium.

Mopar Complete Dodge 6.4l Hemi Intake Manifold 14-2020 2500 3500 04627371af. Mopar Complete Dodge 6.4l Hemi Intake Manifold 14-2020 2500 3500 04627371af.

Oem New Mopar Intake Manifold Screw Hex Flange Head Bolt 03-08 Dodge Jeep

Intake Manifold Screw Bolt Is A Direct Fit For The Following Genuine Mopar Part Number 6506725aa. 2005-2008 Jeep Grand Cherokee. 2004-2008 Dodge Durango. 2005-2008 Dodge Magnum.

Mopar 440 Intake Manifold For 1967 Dodge, Plymouth, Chrysler. 66 Cast Date

Here Is A Very Nice 440 Hp Intake Manifold. This Will Fit All Year 440 Engines, Along With The 426 Wedge And The 413 Engines, Will Not Fit A 383 Or 400 (too Wide). Casting Number Is 2806178. It Has Been Bead Blasted, Inspected And Painted.

Mopar Big Block Intake Manifold Bolts Stainless Kit Bbm 383 400 413 426w 440 Rb. Fits 383, 400, 413, 426 Wedge, 440 R Rb Chrysler Mopar Bb V8 Engines. Big Block Mopar Intake Manifold Bolt Kit (allen). Rusty, Rounded-off Bolts Is A Thing Of The Past! Rogue Stainless Steel Allen Socket Head Bolts Will Not Round Off Like Hex Head Bolts And Are The Clear Choice When Bolt Clearance And Accessibility Is At A Premium.

For Mopar La Tall Intake Throttle Bracket Kit 340 360 318 Dodge Plymouth 66-91. Text & Graphics 2003 - 2019 R. Ehrenberg. New For Mopar La Engines. Throttle Bracket Kit. Adjustable Cable Angle For Varying Intake Heights. Also Provides Easy Installation Of The Cool Lokar Cable-type Kickdown Setup.

Mopar 426 Hemi 2x4 Tunnel Ram Intake Manifold Weiand Holley 4575 Dominators . Mopar 426 Hemi 2x4 Tunnel Ram Intake Manifold Weiand Holley 4575 Dominators. Very Nice Condition Manifold, Very Nice Condition Carburetors, Both Are Rare And Seldom Are They Seen In A Nice Match, Weiand Brand Spacer Plates Are Very Rare And Included With This Old Pro Stock Setup As Well. Direct Connection Original Parts From The 70s , Oil Valley Pan Is Attached To The Bottom Too. Ask Any And All Questions Or More Pics Before You Bid. Let Me Know If You Would Like Manifold Or Carbs Seperate , I Can Revise The Auction.

1966-1971 Mopar 426 Hemi Aluminum Intake Dual Quad Street Manifold 2x4 Super Bee

Nice Original Hemi Intake Manifold Thats Been Displayed For Years. See Pictures For Condition And Wear As We Rely Heavily On Photos. Applications Are Based Upon Various Sources, Although I Try To Make Sure Research Is Correct It Can Be Flawed So Please Verify Your Applications. Please Use A Pc To Take Advantage Of The Zoom Feature As It Will Provide Much Greater Detail Than A Portable Device. Free Shipping Is To The Lower 48 States Only.

1962 1963 1964 1965 1966 1967 Chrysler Dodge 413 426 440 Intake Manifold Mopar

Factory Cast Iron 413 426w Single 4 Bbl Cast Iron Intake Manifold. No Cracks Very Clean Casting Number Is 2206000 I Do Ship Worldwide Usps

Mopar Oem Chrysler Dodge Jeep Intake Manifold Pan Gasket 05017207aa

Mopar Oem Chrysler Dodge Jeep Intake Manifold Pan Gasket 05017207aa H-7 Free Shipping To Lower 48 States

426 Hemi Intake Manifold. It Is Used And And Worked Perfectly. That Modification To Your Intake Was Originally Designed By Arlen Vanke From Akron Ohio For 1967. It Works Very Well. I Have One On My Car. That Little Hook Shape Left In The Rear Intake Plenum Was Left For Torque.

Oem New 11-22 Mopar Dodge Challenger Promaster Se Intake Manifold Bolt 6509390aa. Genuine Mopar Part Number 6509390aa. 2011-2022 Ram 1500 & Cv Promaster 1500 & Promaster 2500 & Promaster 3500. Engine Intake Manifold Bolt Is A Direct Fit For The Following.

Brand New Strip Dom Intake Manifold,bb Mopar,413,426 Wedge,440 V8,1500-6500. Note Spreadbore Carburetors Might Require The Use Of A Carburetor Spacer. Check For Throttle Plate Clearance When Installing This Intake Manifold. Engine Chrysler Big Block V8. Manifold Type Low Rise.

Mopar Cast Iron Intake Manifold 3830733-1 Chrysler Dodge 440 Big Block 4 Barrell. Mopar Cast Iron Intake Manifold 3830733-1.

Mopar Performance P4532067 Tunnel Ram Top Upper Plenum 340 440 Dodge Intake M1

One New Mopar Performance M1 P4532067 Tunnel Ram Upper Half. This Is The Top Half Only. For Use With Standard Flange 4150 Holley Edelbrock Carburetors Mounted Inline Or Sideways. 400 Stroker 511 512.

Weiand Tunnel Ram For 383/400 Mopar “b” Low Deck

Weiand Tunnel Ram For 383400 Mopar b Low Deck. Tunnel Ram Is Hot Coated To Maintain Luster And Is In Excellent Shape, Ports Are Unmolested And Is Ready To Run.

Mopar Edelbrock Dp4b 361 383 400 Aluminum Intake Manifold "rare". Mopar Edelbrock Dp4b Aluminum Intake Manifold "rare".

426 Hemi Mopar Performance Aluminum Intake Manifold Keith Black 2531921 Marine. Part Number 2531921. Designed To Fit - Gen 2 426 Hemi Engine. Unpaid Item Policy.

1960 1961 Chrysler 383 413 Orig Lh Rh Cross Ram Intake Manifolds 1947162 1947163. 1960 1961 Chrysler 383 413 Orig Lh Rh Cross Ram Intake Manifolds 1947162 1947163. Condition Is "used". These Are In Fair Condition, Look Close At Pictures For Flaws. Thier Is A Pin Hole In One Of The Choke Mounting Holes, And Is A Hole Below The Carb Mounting Stud,

Mopar Max Wedge Crossram Intake,carbs,heads,valve Covers "original". These Parts Are Getting Hard To Find.

1956-1966 Mopar Poly 318 Dual Quad Intake Manifold 2x4 Deuce Carbs Carburetor

Hard To Find Early Mopar Dual Quad Intake. The Date Casting Is Hard To Decipher, Please Take A Look For Yourself. See Pictures For Condition And Wear As We Rely Heavily On Photos. Applications Are Based Upon Various Sources, Although I Try To Make Sure Research Is Correct It Can Be Flawed So Please Verify Your Applications. Please Use A Pc To Take Advantage Of The Zoom Feature As It Will Provide Much Greater Detail Than A Portable Device. Free Shipping Is To The Lower 48 States Only.

Intake Manifold Bolts: Sbc,amc,mopar,and All Pontiac,v8: Blue. Intake Manifold Bolts & Bolt Cover Kit, For Small Block Chevy, Amc, Mopar, And All Pontiac,v8. Machined Billet Aluminum Cup Washers (bolt Covers), And Grade 8, Nickle Plated Allen Bolts. Also Available In Aluminum And Anodized Colors, Blue, Red And Black.

Mopar 426 Max Wedge Crossram Intake Manifold 2402726-1 Mopar Rb 413 426w 440. Factory Aluminum Crossram Intake Manifold. Mopar 426 Max Wedge 413 440. Mopar # 2402726-1. I Will Do My Best To Work With You Regarding Any Situation.

Mopar Str-14-6 Intake Manifold Made By Edelbrock W/ Chrysler Numbers

Part Was Bought From An Old Mopar Racer In The Detroit Area. It Has Been Reworked For The Tri Power To Work Better. The Back Side Of The Intake Top Has Been Ground For What Reason We Are Not Sure Of.

Mopar Tm5 Edelbrock 340 360 Torker Intake Manifold 2700 Dart Demon Duster Cuda

Mopar 340 Factory 4bbl Intake Manifold 3462848 1970 Cuda Dart Challenger J17556

Nice Original Intake Manifold J17556

Mopar Sb 340 Factory Cast Iron Intake Manifold 21531915-2 Cuda Challenger J17558. Nice Factory Small Block Mopar 4bbl Intake Manifold. J17558

4 Bbl Intake 2806301 Mopar 383 Big Block Engine Road Runner Charger Super Bee

Chrysler Casting Number 2806301. All Carburetor Mounting Holes Have Good Threads.

Mopar 77060005ac Cold Air Intake Kit ~fits 2003-2005 Dodge Ram 5.7l Hemi. This Is A Mopar Cold Air Intake System That Will Fit 2003-2005 Dodge Ram Model Vehicles With 5.7l Hemi Engines. Please Verify That Your Application Is Legal For Street Use In Your State. It Is Mopar Part Number #787060005ac.

11-20 Jeep Dodge Chrysler Ram 3.6l Tune Up Spark Plugs & Intake Gaskets Oe Mopar. Genuine Mopar Part # 5184562ac (x6). These Oem Factory New Set Of Six Intake Manifold Gaskets And Spark Plugs Are A Direct Fit For The Following. 2011-2018 Dodge Ram 1500 With 3.6l V6 Engine. 2011-2020 Jeep Grand Cherokee With 3.6l V6 Engine.

Grand Cherokee Freightliner Sprinter Intake Manifold Swirl Actuator Motor Mopar

Fits 2007 To 2009 Dodge & Freightliner Sprinters 2500 And 3500 Equipped With 3.0l Diesel Engines. Get Real, Get Mopar Parts! Fits 2007 To 2009 Jeep Grand Cherokee Equipped With 3.0l Diesel Engines.

Edelbrock 7193 Performer Rpm Intake Manifold, Mopar 413,426,440. Retains Good Throttle Response And Acceleration, Designed For 1500 To 6500 Rpm Street-driven Power, It Is Ideal For High-performance Streetstrip Applications, Manifold Is Specially Designed For 413-426-440 C.i.d. Chrysler V8's, A Dual-plane Design Results In Excellent Low-rpm Torque And Outstanding High-rpm Hp.

Nos B & M 1987 - 91 Dodge Chrysler V6 3.9 Blower Intake Manifold #8901079 Mopar

Nos B&m Aluminum Blower Intake Manifold Pt#8901079. This Intake Is Marked 1987-1991 Dodgechrysler V6.

Mopar Oem Intake Manifold 1975-77 Dodge Plymouth 440 4bbl 3688444-2. Mopar Oem Intake Manifold 1975-77 Dodge Plymouth 440 4bbl 3688444-2. Used. Needs Cleaning. Does Not Have Any Broken Tabs. Please Look At The Pictures And Ask Questions As There Is No Warranty Or Refunds. Thanks For Looking.

Mopar 8-3/4 3.91 Suregrip Chunk Cuda,challenger,charger,gtx,dart,duster.

Milodon Usa Intake Manifold Bolts For Small Block Mopar 318 340 360 Dodge La Sb. New Set Of 12 - 1" Long Shorty (tight Fit) Milodon Made In Usa Black 6 Point Intake Manifold Bolts With Washers. Sb Chrysler Plymouth Dodge.

Edelbrock 7193 Performer Rpm Intake, Mopar 413-440, Dual Plane, 4150 Flange. Carb Flange 4150 Flange. Application Bb Mopar 413, 426, 440, 1500-6500rpm. All Intakes Are Reconditioned By Our In-house Techs. Condition New.

Mopar 8-3/4 4.30 Suregrip Chunk Cuda,challenger,charger,gtx,dart,duster

1960 1961 Chrysler 383 413 Orig Lh Rh Cross Ram Intake Manifolds 1947162 1947163

Real 1960 1961 Chrysler 383 413 Factory Installed Aluminum "long" Cross Ram Intake Manifolds Lh #1947162 & Rh #1947163. There Is No Port Work On These Manifolds & Has The Original Aluminum Finish. All Threaded Holes Are Excellent.

Mopar Stage Vi Intake Manifold Spacer - Standard Port

This Design Uses Two Sets Of The. 030 Thick 440 Intake Gaskets. Uses The Valley Tray Gasket As Just An Oil Shield With A Simple Trim Modification To Fit Into Spacer Recess.

Edelbrock Intake Manifold 7576; Rpm Air-gap Satin For Chrysler 340/360 La Mopar. Edelbrock Part #7576 Rpm Air-gap Intake Manifold Is Designed For 340-360 C.i.d. Chrysler V8's And 318 C.i.d. Engines With 340-360 Cylinder Heads. Accepts 1975 And Earlier Waterneck Only. No Provision For Exhaust Heated Chokes And No Exhaust Crossover.

2011-2020 Mopar 3.6l Tune Up Spark Plugs & Intake Gaskets Caravan Ram Cherokee

Genuine Mopar Part # 5184562ac (x6) Sp149125ae (x6). These Oem Factory New Set Of Six Intake Manifold Gaskets And 6 Spark Plugs Are A Direct Fit For The Following. 2011-2020 Jeep Grand Cherokee With 3.6l V6 Engine.

Offenhauser Tunnel Ram 413 426 440 Mopar Challenger Charger Look

Offenhauser Tunnel Ram For Rb Mopar...nice Shape... Shipping In The 48 Us States Is $55 (insured)

Small Block Mopar Aluminum Satin Intake Manifold Air Gap 318 340 360 Magnum

Small Block Mopar Aluminum Intake Manifold. Dual Pattern, Works On Early And The Newer Magnum Heads. Satin Cast Finish. 2.16" X 1.08" Intake Ports. Cast-in Bosses On Intake Runners, Can Be Drilled And Tapped For Use With Nitrous Or Fuel Injection.

Vintage Aluminum Edelbrock Streetmaster Intake 440 Mopar

Mopar Performance Gen 2 Chrysler Hemi Aluminum 2x4 Intake Manifold P4510633 426

You Are Looking At A Mopar Performance Gen Ii Hemi Aluminum Dual Quad Intake, Pt# P4510633 Cast # 2531921. This Intake Fits 1966-71 Chrysler 426 Hemi And All The Bigger Versions Like 528 540 & 572. New, Never Installed.

Mopar 318 Poly Nos Offenhauser Intake Gaskets

These Are The Good Grey "armstrong" Type Material And Do An Excellent Job Of Sealing On All Aluminum (like Offy, Edelbrock And Weiand) And Other Intake Manifolds. The Set Consists Of The Two Side Rail Gaskets Only, See Pic.

Mopar 440 Weiand Team G 7538 Intake Manifold 4500 Dominator Flange 440 413

Mopar 440 Weiand 7538 Team G Aluminum Intake Manifold 4500 Dominator Flange. Nice Intake Lower 48 States Only

Genuine Mopar Engine Intake Manifold 53034229aa. Genuine Mopar Parts. Intake Manifold. Cancellation Policy. We Cannot Take Back Installed Or Tried Parts. We Cannot Take Back Used Parts. In The Unlikely Event That A Part Has Been Placed On Backorder Or Discontinued, We Will Do Our Best To Try And Find One For You As Quickly As Possible.

Mopar 426 Hemi Supercharger Blower Intake Manifold Magnesium Gasser Race Lh1050

I Only Have 13 Of The Hold Down Bolts.

2014-2019 Ram 1500 Grand Cherokee Ecodiesel 3.0l Intake Manifold Assembly Sensor

2014-2019 Ram 1500 Grand Cherokee Ecodiesel 3.0l Intake Manifold Assembly Sensor. Intake Is Dirty And Needs Cleaned Up. Includes Everything In The Photos. Feel Free To Send Any Questions.oem

Mopar Performance 426 Street Hemi Dual Quad 2 4 Barrel Aluminum Intake Manifold. Also Features Factory Casting Machining Numbers As Well As The Chrysler Pentastar Logo. This Manifold Is Not Painted. Genuine Mopar Part # P5153737.

Mopar 440 Intake Manifold 1972, Dodge Plymouth, Chrysler 3614014

Here Is A Very Nice Factory Cast Iron Intake Manifold For Your Mopar 440 Engine. Casting Number Is 3614014 With Cast Date Of 2-10-72. This Will Fit All Year 440 Engines Along With The 413 And 426 Wedge Engines, Will Not Fit A 383 Or 400 Engine.

Mopar Chrysler Bb 383 440 Intake Manifold Gasket Set 1216

Part Type Intake Manifold Gaskets. Gasket Material Printoseal. Quantity Sold As A Set. While All Care Is Taken, Any Errors Or Omissions In The Item Details Is Unintentional.

Mopar 340 Six Pack 4spd Center Carburetor,70 Aar Cuda,70 T/a Challenger

Oem For Mopar 2.5l Intake Manifold W/edm Injected Engine Non-turbo 4667172

Mopar Part Number 4667172. Be Sure The Part You Are Buying Is Correct For Your Application. All Our Parts Are (new Other) Unless Otherwise Specified.

Holley Mopar Intake Manifold Street Dominator 273/318 Port Windows 340/360 Possi. This Intake On A 318 (stick Heads) With Simply A 360 2 Barrel Cam Works Real Good! It Can Be Used On 340360 Large Port Casting Heads, However, To Match The Larger Port Window Of The Heads Youd Have To Enlarge The Manifold Ports.

2009+ Eagle 5.7 Hemi Intake Manifold

2009+ Eagle 5.7 Hemi Intake Manifold. Used Intake Off Of A 2018 5.7 Hemi. 6.1 Injectors Stock Throttle Body And Fuel Railbroken Pcv Hose

Mopar Dodge 225 Slant 6 Intake Manifold.cast Iron. Mopar Dodge 225 Slant 6 Intake Manifold.cast Iron. Pick Up In Franklin Square, Ny 11010

Mopar Big Block Intake Manifold Bolts 12 Point. Mopar Big Block. 12 Point Intake Manifold Bolts. 12 Point Bolts 3 8 " X 16 X 1"& 12 Long. Part # 56308 - N.

Orignal Mopar Slant 6 Intake Manifold 2899959 Dodge Plymouth Chrysler Truck. Make Dodge Chrysler Plymouth.

Mopar Weiand Tri-power Intake Three Deuce 3x2 361 383 400 Big Block Aluminum . Hard To Find Tri-power Intake For Many Mopar Cars. This One Has Been In Retirement For A Couple Of Decades And Is Ready To Get Back To Work. See Pictures For Condition And Wear As We Rely Heavily On Photos. Applications Are Based Upon Various Sources, Although I Try To Make Sure Research Is Correct It Can Be Flawed So Please Verify Your Applications. Please Use A Pc To Take Advantage Of The Zoom Feature As It Will Provide Much Greater Detail Than A Portable Device. Free Shipping Is To The Lower 48 States Only.

Mopar Performance Dodge Chrysler 426 Aluminum Intake Manifold P 5153781. Mopar Performance 426 Hemi Intake Manifold. Mopar Part No P5153781. Intake Is In Very Good Condition, Doesn't Look To Have Had Any Porting Done To It, Intake Bolts Are Included. Intake Is Sold As Is.

Holley Mopar Intake Manifold Street Dominator 340 360 Single Plane Winters

Nice Condition As Seen Images.

Oem Original Big Block Mopar Intake Manifold 383 400 Chrysler Dodge Plymouth

Oem Original Big Block Mopar Intake Manifold 383 400 Chrysler Dodge Plymouth. Dated 3-23-76

Genuine Mopar Dodge 5.7l Hemi Intake Manifold Assembly W/ Fuel Injector & Rails

This Is A Used Good Condition Oem Genuine Dodge 5.7l Hemi Intake Manifold Assembly. Mfg Mopar. Dodge 1500 Pickup 13-18 5.7l. Dodge 1500 Pickup 19-20 Classic Style (5 Lug Wheel), 5.7l. Dodge 1500 Pickup 19-20 New Style (6 Lug Wheel), 5.7l.

Jeep Liberty Dodge Ram Dakota Nitro Durango 3.7l Intake Manifold "refurbish"

This Is A " Refurbished" Intake Manifold For 3.7l Engines Up To 2008. Number Will Be Located On Intake Manifold It Self Stamped To The Plastic And It Ends With 2 Letters """"""""""""""""'example "'53032803aa"".

Mopar Dodge Intake Manifold 71/72 #3614014 With Egr Ports Good Condition

Condition Is "used". There Are No Cracks And There Is No Warpage. Date Appears To Be 111671. 1972 440 4 Barrel Intake Manifold With Egr Ports In Base.

Mopar Cast Iron 4 Barrel Intake Manifold 2206000 413 426 440 Dodge Plymouth

Here Is The Intake From A Mid 1960's 413 Engine. You Are Getting All That See In The Photo's. The Afb Carb Is Original To The Intake. Notice That You Are Getting The Choke Assembly Also. The Manifold Needs Cleaning And Detail.

1996-02 Dodge Viper Rt/10 & Gts Gen 2 Bare Intake Manifold 04763401

Warrantywarranty Duration Item Specifics We Carry A Large Selection Of New Amc, Ford, Gm, And Mopar Parts And Accessories. This Part Is Sold As A Part Number Only. Information Like Which Side A Part Fits (left Or Right) And Specific Vehicle Attributes (transmission, Awdrwd, And Other Vehicle Exclusions) Are Included For Your Information In This Left Column.

413 440 Oem 1965 Big Block Mopar Intake Manifold 2206000 Chrysler Dodge Plymouth

Oem Original 1965 Big Block Mopar Intake Manifold 2206000 Chrysler Dodge Plymouth. Early 4 Barrel Big Block Mopar Intake Manifold fits 413 440 Enginesall Bolt Holes In Good Shapeno Cracksneeds Clean Upcorrect For 1965 1966

Oem Original Big Block Mopar Intake Manifold 2843681 Chrysler Dodge Plymouth

Oem Original Big Block Mopar Intake Manifold 2843681 Chrysler Dodge Plymouthall Bolt Holes In Good Shapeneeds Clean Up2 Barrel

Mopar Performance P5153702 Throttle Body. Throttle Body.

Intake Manifold Bolts: Sbc, Amc, Mopar,& All Pontiac,v8: Black. Intake Manifold Bolts & Bolt Cover Kit, For Small Block Chevy, Amc, Mopar, And All Pontiac,v8. Machined Billet Aluminum Cup Washers (bolt Covers), And Grade 8, Nickle Plated Allen Bolts. Also Available In Aluminum And Anodized Colors, Blue, Red And Black.

Genuine Mopar Intake Manifold Plenum 5184693ae

Genuine Mopar Parts. Cancellation Policy. We Cannot Take Back Installed Or Tried Parts. We Cannot Take Back Used Parts. In The Unlikely Event That A Part Has Been Placed On Backorder Or Discontinued, We Will Do Our Best To Try And Find One For You As Quickly As Possible.

Mopar 1970 440 6 Pack Intake Manifold Six Pk Cast Iron E & B Charger, Gtx

Mopar 1970 440 6 Pack Intake Manifold Six Pk Cast Iron E & B Body Super Bee Gtx. Charger It Has Been Cleaned All Threads Are Good. It Was Casted 12-4-69 The Corner Has Been Welded But They Did A Very Nice Job As You Can See But You Be The Judge I Put Straight Edge On It It Is Very Close Which With The Gaskets. That's Always Used On Them I Don't See It Being A Problem But You Be The Judge Of That If Ya Have Questions Please Ask Thanks Craig

2011-2021 Mopar Upper Intake Manifold Gaskets 3.0l, 3.2l, 3.6l Oem 5184562ac. Part #5184562ac 6 Upper Intake Manifold Gaskets. All Parts Are New Mopar Oem Parts, Unless Otherwise Stated, And Are Covered By Mopars 2 Year Warranty. 2011-2015 Dodge Durango. 2011-2017 Chrysler 200.

1968 Nascar 426 Hemi Mopar Alum 8v Hoerr Usac Intake 2531921 850 & 1050 Holleys

Al Unser Sr. Drove A Dodge In 1968 Usac For Hoerr, Inc. Out Of Peoria, Il. This Was Obtained From A Race Team That Ran Chrysler Products During The 60s And 70s, With A Lot Of Shelflife And A Few Missing Parts Which Are Easily Obtainable, Carbs Should Be Carefully Gone Through But All The Key Pieces Are There.

2008-2010 Chrysler 300 Dodge Charger Magnum 3.5l Upper Air Intake Manifold. We Would Love To Help!

Mopar Oem Intake Manifold 1969 Dodge Plymouth 440 4bbl Magnum 2806178 10-14-68

The Condition Is Good.will Need To Be Blasted And Re-surfaced.

05-06 Charger Grand Cherokee Commander 300 5.7l Hemi Intake Manifold Oem Mopar

2005-2006 Jeep Grand Cherokee With 5.7l Hemi. 2005-2006 Chrysler 300 With 5.7l Hemi.

Dodge Charger Challenger Chrysler 300 Intake Manifold Hex Head Bolt Oem Mopar

This Oem Factory New (single) Intake Manifold Hex Head Bolt Is A Direct Fit For The Following. 2009-2010 Dodge Challenger With 3.5l. Genuine Mopar Part # 6509514aa.

New Oem 14 15 16 17 18 19 Ram 1500 Ds 3.0l Diesel Intake Manifold 68492577aa. This Fits 2014-2019 Model Years.

Mopar 440 Factory Intake Manifold 2806178 1968-69 Charger Gtx Coroner R/t J17554. Nice Original 440 4 Bbl Intake Manifold With Date For 1968-1969 Cars. 12-11-67 J17554

Dodge Challenger Hellcat Replacement Conversion Intake Tube&airbox New Oem Mopar

2015-2018 Dodge Challengers.

Edelbrock Dodge Mopar Chrysler 361 383 400 3x2 Aluminum Intake Dp6b. Edelbrock Part No.

Mopar Stage Vi Intake Manifold Spacer - Max Wedge Port. This Design Uses Two Sets Of The. 030 Thick 440 Intake Gaskets. Uses The Valley Tray Gasket As Just An Oil Shield With A Simple Trim Modification To Fit Into Spacer Recess.

1972 Plymouth Scamp Mopar Intake Manifold 318

Intake Manifold From A 1972 Plymouth Scamp. Good Condition.

New Oem 14 15 16 17 18 19 Ram 1500 Ds 3.0l Diesel Intake Manifold 68492577aa. 2019 Ram 1500 Classic Laramie, Slt, Tradesman 3.0l V6 - Diesel. 2018 Ram 1500 Big Horn, Laramie, Laramie Longhorn, Limited, Lone Star, Slt, Sport, Tradesman 3.0l V6 - Diesel. 2017 Ram 1500 Big Horn, Laramie, Laramie Longhorn, Limited, Lone Star, Slt, Tradesman 3.0l V6 - Diesel.

Offenhauser 5910 Tunnel Ram Intake Manifold Top Only 1 X 4 Mopar 383. This Is An Offenhauser 1x4 Top, Number 5910 - Lists As A Mopar 383 Top.

Edelbrock Performer Aluminum Intake Manifold #2191 440 Chrysler "rb" Mopar Wedge

No Mods - No Waiting On Backorders For A New One - Get It Now!

Edelbrock 426 Hemi Tunnel Ram Pro Stock 4500 Ir11 Ur11 528 572 Mopar Chrysler

Does Not Appear To Have Ever Been Used, For Use With Large 4500 Holley Dominator Carbs.

Engine Intake Manifold-vin: B Mopar 4593915ab. The Engine Types May Include 2.0l 1998cc 122cu. L4 Gas Dohc Naturally Aspirated,2.4l 2360cc 144cu. L4 Gas Dohc Naturally Aspirated. This Part Fits Vehicles Made In The Following Years 2009,2010,2011,2012,2013,20 14,2015,2016.

1960 1961 Mopar Cross Ram Intake Manifolds & Air Cleaners Chrysler 383 413 Dual . Really Cool Find From A Desert Barn That Have Been Stored Away For Several Decades By A Recluse Mopar Collector. Needless To Say They Are Extraordinarily Solid, And Appear To Be Unusually Complete. If You Look At The Last Photo You'll See There Is Some Sort Of Imperfection In The Casting, It Is Not Cracked Though. Very Cool Find And The First Time Theyve Seen Daylight Since The Late 1970s Or Early 1980s. See Pictures For Condition And Wear As We Rely Heavily On Photos. Applications Are Based Upon Various Sources, Although I Try To Make Sure Research Is Correct It Can Be Flawed So Please Verify Your Applications. Please Use A Pc To Take Advantage Of The Zoom Feature As It Will Provide Much Greater Detail Than A Portable Device. Free Shipping Is To The Lower 48 States Only.

Small Block Mopar Aluminum Air Gap Intake Manifold 318 340 360 Black Finish. Fits Small Block Mopar 318, 340 And 360 V8's ( Including Magnum Engines ). The Main Difference Is That There Is An Open Area Under The Plenum Chamber. Intake Manifold Height 5.500 In. Intake Material Aluminum.

Mopar 440 Six Pack Intake, Carbs & Air Cleaner Holley 6 Barrel Carburetors

Pretty Complete Six Pack Setup Complete With Linkage, Air Cleaner, Intake And Carbs. You Get Everything Pictured. See Pictures For Condition And Wear As We Rely Heavily On Photos. Applications Are Based Upon Various Sources, Although I Try To Make Sure Research Is Correct It Can Be Flawed So Please Verify Your Applications. Please Use A Pc To Take Advantage Of The Zoom Feature As It Will Provide Much Greater Detail Than A Portable Device. Free Shipping Is To The Lower 48 States Only.

2011-2021 Mopar Upper Intake Manifold Gaskets 3.6l Oem 5184562ac. For Sale Is A Set Of 6 Upper Intake Manifold Gaskets.

Mopar Engine Intake Manifolds 04884495ak

Mopar 04884495ak Intake Manifold Fits 2006-2017 Jeep Compasspatriot

1951 52 53 54 Chysler 331 Hemi Nos Mopar 2bbl Intake Manifold #1326812. New, Never Installed, Original Nos Mopar Two Barrel Intake Manifold Part #1326812 Superseded By #1550991.